Our Publications
International Peer Reviewed Journals
Here you can find a list of the publications of the Thermal Energy Innovation research group in international peer reviewed journals. Full-text preprints of our publications are readily available upon request via email.
2024
G. Righetti, C. Zilio, K. Hooman, and S. Mancin, “Market-orientated solutions to increase thermal conductivity in latent thermal energy storage systems,” Applied Thermal Engineering, vol. 243, p. 122583, Apr. 2024, doi: 10.1016/j.applthermaleng.2024.122583.
2023
D. Guarda et al., “New liquid fraction measurement methodology for phase change material analysis based on X-ray computed tomography,” International Journal of Thermal Sciences, vol. 194, p. 108585, Dec. 2023, doi: 10.1016/j.ijthermalsci.2023.108585.
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “Hydrocarbon refrigerants boiling local heat transfer coefficients inside a Brazed Plate Heat Exchanger (BPHE),” International Journal of Refrigeration, vol. 156, pp. 113–122, Dec. 2023, doi: 10.1016/j.ijrefrig.2022.10.001.
​
G. Righetti, G. A. Longo, S. Mancin, and C. Zilio, “Shape optimization of lattice-frame materials obtained via additive manufacturing during air forced convection,” Experimental Heat Transfer, vol. 36, no. 7, pp. 954–969, Nov. 2023, doi: 10.1080/08916152.2022.2084472.
D. Guarda, G. Righetti, G. A. Longo, C. Zilio, and S. Mancin, “Experimental assessment of low temperature phase change materials (PCM) for refrigerating and air conditioning applications,” International Journal of Refrigeration, vol. 154, pp. 33–42, Oct. 2023, doi: 10.1016/j.ijrefrig.2023.07.016.
​
G. Righetti et al., “Experimental analysis of a commercial size bio-based latent thermal energy storage for air conditioning,” Journal of Energy Storage, vol. 72, p. 108477, Nov. 2023, doi: 10.1016/j.est.2023.108477.
​
S. Zhang, S. Mancin, and L. Pu, “A review and prospective of fin design to improve heat transfer performance of latent thermal energy storage,” Journal of Energy Storage, vol. 62, p. 106825, Jun. 2023, doi: 10.1016/j.est.2023.106825.
J. Martinez-Garcia et al., “Volumetric quantification of melting and solidification of phase change materials by in-situ X-ray computed tomography,” Journal of Energy Storage, vol. 61, p. 106726, May 2023, doi: 10.1016/j.est.2023.106726.
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “Hydrocarbon refrigerants condensation local heat transfer coefficients inside a brazed plate heat exchanger (BPHE),” International Journal of Heat and Mass Transfer, vol. 201, p. 123615, Feb. 2023, doi: 10.1016/j.ijheatmasstransfer.2022.123615.
M. Calati, G. Righetti, C. Zilio, K. Hooman, and S. Mancin, “CFD analyses for the development of an innovative latent thermal energy storage for food transportation,” International Journal of Thermofluids, vol. 17, p. 100301, Feb. 2023, doi: 10.1016/j.ijft.2023.100301.
2022
S. M. Guarda M. Calati, D., “Experimental Techniques and Challenges in Evaluating the Performance of PCMs,” in Solid-Liquid Thermal Energy Storage, CRC Press, 2022.
​
M. Noro, S. Mancin, and C. Zilio, “Energy Performance of Annual Operation of Heat Pump Coupled with Ground Ice Storage and Photovoltaic/Thermal modules,” J. Phys.: Conf. Ser., vol. 2385, no. 1, p. 012007, Dec. 2022, doi: 10.1088/1742-6596/2385/1/012007.
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “Experimental measurement of thermophysical properties of some commercial phase change materials (PCM) for air conditioning applications,” International Journal of Refrigeration, vol. 144, pp. 202–210, Dec. 2022, doi: 10.1016/j.ijrefrig.2022.08.007.
G. Righetti, C. Zilio, G. A. Longo, K. Hooman, and S. Mancin, “Experimental study on the effect of metal foams pore size in a phase change material based thermal energy storage tube,” Applied Thermal Engineering, vol. 217, p. 119163, Nov. 2022, doi: 10.1016/j.applthermaleng.2022.119163.
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “Hydrocarbon Refrigerants Boiling Local Heat Transfer Coefficients Inside a Brazed Plate Heat Exchanger (BPHE),” International Journal of Refrigeration, Oct. 2022, doi: 10.1016/j.ijrefrig.2022.10.001.
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “Local heat transfer coefficients of R32 and R410a condensation inside a brazed plate heat exchanger (BPHE),” International Journal of Heat and Mass Transfer, vol. 194, p. 123041, Sep. 2022, doi: 10.1016/j.ijheatmasstransfer.2022.123041.
D. Guarda et al., “Phase Change Material numerical simulation: enthalpy-porosity model validation against liquid fraction data from an X-ray computed tomography measurement/system,” Nondestructive Testing and Evaluation, vol. 37, no. 5, pp. 508–518, Sep. 2022, doi: 10.1080/10589759.2022.2070164.
M. Noro and C. Zilio, “Heat recovery in ventilation systems in different climates: energy and economic comparison in old and new schools in COVID-19 pandemic conditions,” Science and Technology for the Built Environment, vol. 28, no. 7, pp. 864–885, Aug. 2022, doi: 10.1080/23744731.2022.2067423.
F. Martelletto, L. Doretti, and S. Mancin, “Numerical simulation through experimental validation of latent and sensible concrete thermal energy storage system,” Journal of Energy Storage, vol. 51, p. 104567, Jul. 2022, doi: 10.1016/j.est.2022.104567.
G. Favero et al., “Experimental and numerical analyses of fluid flow inside additively manufactured and smoothed cooling channels,” International Communications in Heat and Mass Transfer, vol. 135, p. 106128, Jun. 2022, doi: 10.1016/j.icheatmasstransfer.2022.106128.
G. Righetti, G. A. Longo, S. Mancin, and C. Zilio, “Shape optimization of lattice-frame materials obtained via additive manufacturing during air forced convection,” Experimental Heat Transfer, vol. 0, no. 0, pp. 1–16, May 2022, doi: 10.1080/08916152.2022.2084472.
M. Calati, C. Zilio, G. Righetti, G. A. Longo, K. Hooman, and S. Mancin, “Latent thermal energy storage for refrigerated trucks,” International Journal of Refrigeration, vol. 136, pp. 124–133, Apr. 2022, doi: 10.1016/j.ijrefrig.2022.01.018.
2021
G. Righetti, C. Zilio, L. Doretti, G. A. Longo, and S. Mancin, “On the design of Phase Change Materials based thermal management systems for electronics cooling,” Applied Thermal Engineering, vol. 196, p. 117276, Sep. 2021, doi: 10.1016/j.applthermaleng.2021.117276.
​
G. Righetti, C. Zilio, G. Savio, R. Meneghello, M. Calati, and S. Mancin, “Experimental pressure drops during the water flow into porous materials realized via additive manufacturing,” J. Phys.: Conf. Ser., vol. 2116, no. 1, p. 012059, Nov. 2021, doi: 10.1088/1742-6596/2116/1/012059.
​
S. Mancin and K. Hooman, “Selected Papers from the 1st International Conference on Nanofluids (ICNf),” Heat Transfer Engineering, vol. 42, no. 19–20, pp. 1611–1613, Nov. 2021, doi: 10.1080/01457632.2020.1818370.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “Comparative analysis of microfin vs smooth tubes in R32 and R410A condensation,” International Journal of Refrigeration, vol. 128, pp. 218–231, Aug. 2021, doi: 10.1016/j.ijrefrig.2021.04.011.
​
A. Gimeno-Furio et al., “Effects of Carbon Nanohorn Based Nanofluids Pool Boiling on Optical Properties and Wettability of Different Metal Surfaces,” Heat Transfer Engineering, vol. 42, no. 19–20, pp. 1688–1701, Nov. 2021, doi: 10.1080/01457632.2020.1818407.
​
M. Calati, L. Doretti, C. Zilio, and S. Mancin, “3D numerical simulation of a novel ventilated roof: thermal performance analysis and fluid flow behavior,” Science and Technology for the Built Environment, vol. 27, no. 6, pp. 819–831, Jul. 2021, doi: 10.1080/23744731.2021.1917931.
​
M. Calati et al., “Water pool boiling in metal foams: From experimental results to a generalized model based on artificial neural network,” International Journal of Heat and Mass Transfer, vol. 176, p. 121451, Sep. 2021, doi: 10.1016/j.ijheatmasstransfer.2021.121451.
2020
G. Righetti, L. Doretti, C. Zilio, G. A. Longo, and S. Mancin, “Experimental investigation of phase change of medium/high temperature paraffin wax embedded in 3D periodic structure,” International Journal of Thermofluids, vol. 5–6, p. 100035, Aug. 2020, doi: 10.1016/j.ijft.2020.100035.
​
G. Righetti, L. Doretti, H. Sadafi, K. Hooman, and S. Mancin, “Water pool boiling across low pore density aluminum foams,” Heat Transfer Engineering, vol. 41, no. 19–20, pp. 1673–1682, Nov. 2020, doi: 10.1080/01457632.2019.1640464.
​
G. Righetti et al., “Effect of Refrigerant Properties Estimation on the Prediction Capabilities of Well-Established Two-Phase Heat Transfer and Pressure Drop Models for New Refrigerants,” J. Phys.: Conf. Ser., vol. 1599, no. 1, p. 012054, Aug. 2020, doi: 10.1088/1742-6596/1599/1/012054.
​
G. A. Longo, G. Righetti, C. Zilio, L. Ortombina, M. Zigliotto, and J. S. Brown, “Application of an Artificial Neural Network (ANN) for predicting low-GWP refrigerant condensation heat transfer inside herringbone-type Brazed Plate Heat Exchangers (BPHE),” International Journal of Heat and Mass Transfer, vol. 156, p. 119824, Aug. 2020, doi: 10.1016/j.ijheatmasstransfer.2020.119824.
​
G. A. Longo, S. Mancin, G. Righetti, C. Zilio, R. Ceccato, and L. Salmaso, “Machine learning approach for predicting refrigerant two-phase pressure drop inside Brazed Plate Heat Exchangers (BPHE),” International Journal of Heat and Mass Transfer, vol. 163, p. 120450, Dec. 2020, doi: 10.1016/j.ijheatmasstransfer.2020.120450.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “Flow boiling heat transfer capabilities of R134a low GWP substitutes inside a 4 mm id horizontal smooth tube: R600a and R152a,” Heat Mass Transfer, Nov. 2020, doi: 10.1007/s00231-020-02991-x.
​
G. A. Longo, S. Mancin, G. Righetti, C. Zilio, and J. Steven Brown, “Assessment of the low-GWP refrigerants R600a, R1234ze(Z) and R1233zd(E) for heat pump and organic Rankine cycle applications,” Applied Thermal Engineering, vol. 167, p. 114804, Feb. 2020, doi: 10.1016/j.applthermaleng.2019.114804.
​
G. A. Longo, S. Mancin, G. Righetti, C. Zilio, and J. S. Brown, “Assessment and optimisation of low-GWP refrigerants during two-phase heat transfer inside small-diameter smooth tubes,” International Journal of Refrigeration, vol. 117, pp. 61–70, Sep. 2020, doi: 10.1016/j.ijrefrig.2020.03.022.
​
G. A. Longo, S. Mancin, G. Righetti, C. Zilio, L. Ortombina, and M. Zigliotto, “Application of an Artificial Neural Network (ANN) for predicting low-GWP refrigerant boiling heat transfer inside Brazed Plate Heat Exchangers (BPHE),” International Journal of Heat and Mass Transfer, vol. 160, p. 120204, Oct. 2020, doi: 10.1016/j.ijheatmasstransfer.2020.120204.
​
L. Fedele, S. Bobbo, M. Scattolini, C. Zilio, and R. Akasaka, “HCFO refrigerant cis-1-chloro-2,3,3,3 tetrafluoropropene [R1224yd(Z)]: Experimental assessment and correlation of the liquid density,” International Journal of Refrigeration, vol. 118, pp. 139–145, Oct. 2020, doi: 10.1016/j.ijrefrig.2020.06.001.
​
L. Doretti, G. Righetti, G. A. Longo, C. Zilio, and S. Mancin, “On the hysteresis phenomenon during flow boiling heat transfer on a hydrophilic carbon/carbon surface,” International Communications in Heat and Mass Transfer, vol. 117, p. 104795, Oct. 2020, doi: 10.1016/j.icheatmasstransfer.2020.104795.
2019
G. Righetti, G. A. Longo, C. Zilio, and S. Mancin, “Flow boiling of environmentally friendly refrigerants inside a compact enhanced tube,” International Journal of Refrigeration, vol. 104, pp. 344–355, Aug. 2019, doi: 10.1016/j.ijrefrig.2019.05.036.
​
G. A. Longo, G. Righetti, and C. Zilio, “Heat-transfer assessment of the low GWP substitutes for traditional HFC refrigerants,” International Journal of Heat and Mass Transfer, vol. 139, pp. 31–38, Aug. 2019, doi: 10.1016/j.ijheatmasstransfer.2019.04.144.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “Saturated vapour condensation of R134a inside a 4 mm ID horizontal smooth tube: Comparison with the low GWP substitutes R152a, R1234yf and R1234ze(E),” International Journal of Heat and Mass Transfer, vol. 133, pp. 461–473, Apr. 2019, doi: 10.1016/j.ijheatmasstransfer.2018.12.115.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “R1234yf and R1234ze(E) as environmentally friendly replacements of R134a: Assessing flow boiling on an experimental basis,” International Journal of Refrigeration, vol. 108, pp. 336–346, Dec. 2019, doi: 10.1016/j.ijrefrig.2019.09.008.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “Boiling of the new low-GWP refrigerants R1234ze(Z) and R1233zd(E) inside a small commercial brazed plate heat exchanger,” International Journal of Refrigeration, vol. 104, pp. 376–385, Aug. 2019, doi: 10.1016/j.ijrefrig.2019.05.034.
​
R. Lazzarin, M. Noro, G. Righetti, and S. Mancin, “Application of Hybrid PCM Thermal Energy Storages with and without Al Foams in Solar Heating/Cooling and Ground Source Absorption Heat Pump Plant: An Energy and Economic Analysis,” Applied Sciences, vol. 9, no. 5, Art. no. 5, Jan. 2019, doi: 10.3390/app9051007.
​
K. Hooman, H. Sadafi, S. Mancin, G. Righetti, and G. Xin, “Theoretical analysis of free convection in a partially foam-filled enclosure,” Heat Mass Transfer, vol. 55, no. 7, pp. 1937–1946, Jul. 2019, doi: 10.1007/s00231-018-2466-4.
​
C. Zilio, G. Righetti, G. Pernigotto, and G. A. Longo, “Analysis of the freezing time of chicken breast finite cylinders,” International Journal of Refrigeration, vol. 95, pp. 38–50, Nov. 2018, doi: 10.1016/j.ijrefrig.2018.08.013.
2018
C. Zilio et al., “Active and passive cooling technologies for thermal management of avionics in helicopters: Loop heat pipes and mini-Vapor Cycle System,” Thermal Science and Engineering Progress, vol. 5, pp. 107–116, Mar. 2018, doi: 10.1016/j.tsep.2017.11.002.
​
G. Righetti, C. Zilio, S. Mancin, and G. A. Longo, “Heat Pipe Finned Heat Exchanger for Heat Recovery: Experimental Results and Modeling,” Heat Transfer Engineering, vol. 39, no. 12, pp. 1011–1023, Jul. 2018, doi: 10.1080/01457632.2017.1358483.
​
G. Righetti, G. A. Longo, C. Zilio, R. Akasaka, and S. Mancin, “R1233zd(E) flow boiling inside a 4.3 mm ID microfin tube,” International Journal of Refrigeration, vol. 91, pp. 69–79, Jul. 2018, doi: 10.1016/j.ijrefrig.2018.04.020.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “Saturated vapour condensation of R410A inside a 4 mm ID horizontal smooth tube: Comparison with the low GWP substitute R32,” International Journal of Heat and Mass Transfer, vol. 125, pp. 702–709, Oct. 2018, doi: 10.1016/j.ijheatmasstransfer.2018.04.109.
​
R. M. Lazzarin, S. Mancin, M. Noro, and G. Righetti, “Hybrid PCM—aluminium foams’ thermal storages: an experimental study,” International Journal of Low-Carbon Technologies, vol. 13, no. 3, pp. 286–291, Sep. 2018, doi: 10.1093/ijlct/cty030.
​
A. Diani, S. Mancin, M. Balcon, E. Savio, and L. Rossetto, “R1234yf Flow Boiling Heat Transfer in a Rectangular Channel Heated from the Bottom,” Heat Transfer Engineering, vol. 39, no. 3, pp. 198–207, Feb. 2018, doi: 10.1080/01457632.2017.1295733.
​
S. Bobbo, G. D. Nicola, C. Zilio, J. S. Brown, and L. Fedele, “Low GWP halocarbon refrigerants: A review of thermophysical properties,” International Journal of Refrigeration, vol. 90, pp. 181–201, Jun. 2018, doi: 10.1016/j.ijrefrig.2018.03.027.
2017
C. Zilio, G. A. Longo, G. Pernigotto, F. Chiacchio, P. Borrelli, and E. D’Errico, “CFD analysis of aircraft fuel tanks thermal behaviour,” J. Phys.: Conf. Ser., vol. 923, no. 1, p. 012027, Nov. 2017, doi: 10.1088/1742-6596/923/1/012027.
​
G. A. Longo, C. Zilio, L. Ortombina, and M. Zigliotto, “Application of Artificial Neural Network (ANN) for modeling oxide-based nanofluids dynamic viscosity,” International Communications in Heat and Mass Transfer, vol. 83, pp. 8–14, Apr. 2017, doi: 10.1016/j.icheatmasstransfer.2017.03.003.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “Saturated vapour condensation of HFC404A inside a 4mm ID horizontal smooth tube: Comparison with the long-term low GWP substitutes HC290 (Propane) and HC1270 (Propylene),” International Journal of Heat and Mass Transfer, vol. 108, pp. 2088–2099, May 2017, doi: 10.1016/j.ijheatmasstransfer.2016.12.087.
​
G. A. Longo, S. Mancin, G. Righetti, C. Zilio, and L. Doretti, “Saturated R134a flow boiling inside a 4.3 mm inner diameter microfin tube,” Science and Technology for the Built Environment, vol. 23, no. 6, pp. 933–945, Aug. 2017, doi: 10.1080/23744731.2017.1300012.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “Hydrocarbon refrigerants HC290 (Propane) and HC1270 (Propylene) low GWP long-term substitutes for HFC404A: A comparative analysis in vaporisation inside a small-diameter horizontal smooth tube,” Applied Thermal Engineering, vol. 124, pp. 707–715, Sep. 2017, doi: 10.1016/j.applthermaleng.2017.06.080.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “HFC404A condensation inside a small brazed plate heat exchanger: Comparison with the low GWP substitutes propane and propylene,” International Journal of Refrigeration, vol. 81, pp. 41–49, Sep. 2017, doi: 10.1016/j.ijrefrig.2017.05.017.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “Flow dynamic and energetic assessment of a commercial micro-pump for a portable/wearable artificial kidney: Peristaltic vs. diaphragm pumps,” Thermal Science and Engineering Progress, vol. 3, pp. 31–36, Sep. 2017, doi: 10.1016/j.tsep.2017.03.006.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “R245fa Flow Boiling inside a 4.2 mm ID Microfin Tube,” J. Phys.: Conf. Ser., vol. 923, no. 1, p. 012016, Nov. 2017, doi: 10.1088/1742-6596/923/1/012016.
​
L. Doretti, G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “Flow boiling heat transfer on a Carbon/Carbon surface,” International Journal of Heat and Mass Transfer, vol. 109, pp. 938–948, Jun. 2017, doi: 10.1016/j.ijheatmasstransfer.2017.02.066.
​
L. Doretti, G. A. Longo, S. Mancin, G. Righetti, and J. A. Weibel, “Nanoparticle Deposition During Cu-Water Nanofluid Pool Boiling,” J. Phys.: Conf. Ser., vol. 923, no. 1, p. 012004, Nov. 2017, doi: 10.1088/1742-6596/923/1/012004.
​
L. Colla, D. Ercole, L. Fedele, S. Mancin, O. Manca, and S. Bobbo, “Nano-Phase Change Materials for Electronics Cooling Applications,” Journal of Heat Transfer, vol. 139, no. 052406, Mar. 2017, doi: 10.1115/1.4036017.
2016
G. Righetti, C. Zilio, S. Mancin, and G. A. Longo, “A review on in-tube two-phase heat transfer of hydro-fluoro-olefines refrigerants,” Science and Technology for the Built Environment, vol. 22, no. 8, pp. 1191–1225, Nov. 2016, doi: 10.1080/23744731.2016.1229528.
​
G. Patankar, S. Mancin, J. A. Weibel, S. V. Garimella, and M. A. MacDonald, “A Method for Thermal Performance Characterization of Ultrathin Vapor Chambers Cooled by Natural Convection,” Journal of Electronic Packaging, vol. 138, no. 010903, Mar. 2016, doi: 10.1115/1.4032345.
​
S. Mancin, A. Diani, S. Vezzù, and L. Rossetto, “Flow boiling heat transfer of R1234yf on a microparticle coated copper surface,” Science and Technology for the Built Environment, vol. 22, no. 8, pp. 1156–1166, Nov. 2016, doi: 10.1080/23744731.2016.1218233.
​
G. A. Longo, G. Righetti, and C. Zilio, “Development of an Innovative Raw Milk Dispenser Based on Nanofluid Technology,” International Journal of Food Engineering, vol. 12, no. 2, pp. 165–172, Mar. 2016, doi: 10.1515/ijfe-2015-0127.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “Saturated flow boiling of HFC134a and its low GWP substitute HFO1234ze(E) inside a 4 mm horizontal smooth tube,” International Journal of Refrigeration, vol. 64, pp. 32–39, Apr. 2016, doi: 10.1016/j.ijrefrig.2016.01.015.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “HFO1234ze(E) vaporisation inside a Brazed Plate Heat Exchanger (BPHE): Comparison with HFC134a and HFO1234yf,” International Journal of Refrigeration, vol. 67, pp. 125–133, Jul. 2016, doi: 10.1016/j.ijrefrig.2016.04.002.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “HFC404A vaporisation inside a Brazed Plate Heat Exchanger (BPHE): Comparison with the possible long-term low GWP substitutes HC290 (Propane) and HC1270 (Propylene),” Applied Thermal Engineering, vol. 108, pp. 1401–1408, Sep. 2016, doi: 10.1016/j.applthermaleng.2016.08.006.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “HFC32 and HFC410A flow boiling inside a 4 mm horizontal smooth tube,” International Journal of Refrigeration, vol. 61, pp. 12–22, Jan. 2016, doi: 10.1016/j.ijrefrig.2015.09.002.
​
J. S. Brown, C. Zilio, R. Akasaka, and Y. Higashi, “Low-GWP refrigerants,” Science and Technology for the Built Environment, vol. 22, no. 8, pp. 1075–1076, Nov. 2016, doi: 10.1080/23744731.2016.1230981.
2015
C. Zilio and S. Mancin, “Shell and tube carbon dioxide gas coolers – Experimental results and modelling,” International Journal of Refrigeration, vol. 56, pp. 224–234, Aug. 2015, doi: 10.1016/j.ijrefrig.2015.04.006.
​
C. Zilio, R. Brignoli, N. Kaemmer, and B. Bella, “Energy efficiency of a reversible refrigeration unit using R410A or R32,” Science and Technology for the Built Environment, vol. 21, no. 5, pp. 502–514, Jul. 2015, doi: 10.1080/23744731.2015.1035589.
​
G. Righetti, C. Zilio, and G. A. Longo, “Comparative performance analysis of the low GWP refrigerants HFO1234yf, HFO1234ze(E) and HC600a inside a roll-bond evaporator,” International Journal of Refrigeration, vol. 54, pp. 1–9, Jun. 2015, doi: 10.1016/j.ijrefrig.2015.02.010.
​
G. A. Longo, C. Zilio, and G. Righetti, “Condensation of the low GWP refrigerant HFC152a inside a Brazed Plate Heat Exchanger,” Experimental Thermal and Fluid Science, vol. 68, pp. 509–515, Nov. 2015, doi: 10.1016/j.expthermflusci.2015.06.010.
​
G. A. Longo, G. Righetti, and C. Zilio, “A new computational procedure for refrigerant condensation inside herringbone-type Brazed Plate Heat Exchangers,” International Journal of Heat and Mass Transfer, vol. 82, pp. 530–536, Mar. 2015, doi: 10.1016/j.ijheatmasstransfer.2014.11.032.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “HFC32, a low GWP substitute for HFC410A in medium size chillers and heat pumps,” International Journal of Refrigeration, vol. 53, pp. 62–68, May 2015, doi: 10.1016/j.ijrefrig.2015.01.014.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “HFC32 vaporisation inside a Brazed Plate Heat Exchanger (BPHE): Experimental measurements and IR thermography analysis,” International Journal of Refrigeration, vol. 57, pp. 77–86, Sep. 2015, doi: 10.1016/j.ijrefrig.2015.04.017.
​
G. A. Longo, S. Mancin, G. Righetti, and C. Zilio, “A new model for refrigerant boiling inside Brazed Plate Heat Exchangers (BPHEs),” International Journal of Heat and Mass Transfer, vol. 91, pp. 144–149, Dec. 2015, doi: 10.1016/j.ijheatmasstransfer.2015.07.078.
​
D. Del Col, M. Azzolin, S. Bortolin, and C. Zilio, “Two-phase pressure drop and condensation heat transfer of R32/R1234ze(E) non-azeotropic mixtures inside a single microchannel,” Science and Technology for the Built Environment, vol. 21, no. 5, pp. 595–606, Jul. 2015, doi: 10.1080/23744731.2015.1047718.